Turbo Nozzles for Pressure Washing
SUTTNER ST-357 Turbo Nozzles
SUTTNER
ST-357 Turbo
Suttner ST-357
Turbo Nozzles
-Cleaning Efficiency As Much As 200%
-The 0° Rotation Creates A Cleaning And Tearing Action
-Ideal For Hard Surfaces
-Improved Materials For Longer Life
-3625 PSI, 1/4″ FNPT
SUTTNER ST-457 TURBO 6000 PSI
COLORED SEATS INDICATE ORIFICE SIZE
•Increases Cleaning Efficiency As Much As 200%
•The 0° Rotation Creates A Cleaning And Tearing Action
•Ideal For Hard Surfaces
•Improved Materials For Longer Life
•6000 PSI, 1/4″ FNPT
SUTTNER
ST-457-10 Turbo Nozzle
Part #ST457-10
Turbo Nozzle
Suttner # 200457510
6,000 PSI
Size 10
Repair Kit – Call
MTM Hydro RotoJet Turbo 5000 PSI
MTM Hydro’s German made 5,000 PSI RotoJet Turbo Nozzle is the ideal pressure washing accessory for the worst cleaning conditions. This top tier turbo nozzle is widely known as being among the most reliable in the world because of its roots in German manufacturing. As with all turbo nozzles, the RotoJet has a laser nozzle that spins at an incredible rate increasing your cleaning area from zero degrees to 26°. MTM Hydro’s Turbo Nozzles are found in a variety of industries including Sewer Cleaning, Contract Cleaning, Hydro Excavation, Mining, Potholing, Agriculture, Aggregate, Directional Drilling, Slurry Removal, Industrial Clean-up, Waste Clean-up, Lift-Station Clean-up, Manhole Clean-out, Culvert Clean-out, Lateral and Storm Drain Clean-out, Oil Spill Clean-up, Natural Disaster cleaning applications, Power Pole installation, Signs and Headstone setting, Graffiti & Gum Removal and Weekend Warrior Duties!
MTM HYDRO-ROTOJET 5,000 PSI 4.0 Turbo Nozzle
MTM HYDRO-ROTOJET 5,000 PSI 4.5 Turbo Nozzle
Part #1563
Turbo Nozzle
MTM Hydro-Rotojet
5000 PSI
Size 4.5
MTM HYDRO-ROTOJET 5,000 PSI 5.0 Turbo Nozzle
MTM HYDRO-ROTOJET 5,000 PSI 5.5 Turbo Nozzle
RotoJet Turbo 5800 PSI
Turbo Filter
Turbo Shield
This ‘splatter shield’ attaches to any lance and covers the turbo nozzle so harsh chemicals and pressure do not come in contact with delicate surfaces.
PA TURBO 3,650 PSI Stiletto Turbo
RotoMax Turbo "Great for Gum Removal"
EnviroSpec’s Technical Library
Section: Description – Specialty Rotating Nozzles
These rotating pressure water nozzles have a zero degree nozzle assembly that is contained in a housing. The water pressure is used to spin this nozzle assembly around the inside of the housing. The tip of the nozzle assembly rotates in a very tight pattern against a race in the front of the body. The back section rotates inside a larger section of the body. The result is a zero degree nozzle that rapidly spins in a cone shape. This produces a much larger contact area with the surface to be worked than would be contacted without the rotating action. Rotating pressure washer nozzles are used when strong impact won’t damage the surface. They are ideal for paint preparation, stone cleaning, etc. The nozzle needs to be sized properly to the equipment. If the orifice is too large it won’t spin quickly and the impact will be less. An undersized rotating nozzle will spin very fast and hit hard, but it probably will fail prematurely.
Section: Surface Damage
Be aware of what the nozzle is doing. The more powerful the tool, the closer you need to watch. Rotating pressure specialty washer nozzles have a strong impact. If, for example you are paint prepping a house, the wood siding can easily be splintered and gouged. Some sidings are softer than others. So watching carefully and adjusting the distance between the nozzle and the surface is the only way to accomplish the job without causing damage.
EnviroSpec’s Technical Library
Section: Specialty Rotating Nozzle Sizes
By size meaning the whole nozzle, not the orifice size. The larger the diameter of the nozzle housing the wider the cone spray angle will be. The wider the cone angle, the larger the surface contact and the faster you will be able to work. The larger the nozzle body the more the nozzle weighs. This becomes a comfort factor sometimes when working for long periods. By using a lance with a 45-degree bend at the end instead of a straight lance the nozzle, the weight can be offset by the water thrust. A large nozzle housing can also make it difficult to work in tight places.
Section: Usage Tips
Keep the nozzle pointed down when starting to spray. The nozzle tip and race are constructed of ceramic. The ceramic can be damaged the impact caused by the water pressure. The parts are already in contact when the nozzle is pointing down. Any debris that gets into the rotary nozzle can potentially damage it. A single grain of sand can etch the ceramic race and cause the nozzle to stop spinning. That is why it is important to install a high-pressure filter just before the nozzle. This filter will block dirt that enters the water stream after the inlet water filter. There are many places for more debris to enter. Scale can break loose from the coil. Rust can be dislodged from fittings. Anytime you quick connect hoses together or connect a trigger gun, grit can get inside the lines. Test surface tolerance and effectiveness prior to doing a whole job. In rare cases a problem isn’t evident until the surface has dried. For example, sometimes when cleaning concrete if the rotary specialty nozzle is moved too rapidly it will leave circles on the surface. These circles don’t always show when the job is still wet. So if you do a complete job, say like a sidewalk in front of a store, you may end up getting a shock as the surface dries. The circles can be avoided by modifying your washing technique. Angling the nozzle spray to the surface, backing off, or slowing down can correct a problem like this. But without a test, you’ll never know.
