Surface Cleaners

Flat Surface & Concrete Cleaning Spinners

General Pump Hammerhead Surface

General Pump ABS Surface Cleaner

Industrial ABS Plastic

18″ & 20″ Spinners

• ABS Plastic Deck with 2-nozzle bar*
• Durable swivel with grease fitting
• Rated to 4,500 PSI & 12.0 GPM

Requires 2 each 1/4” MEG Nozzles.
See nozzle information on this page.

Part #: 1852 – 18” ABS Hammerhead
…best from 4-5 GPM

Each $327.00


Part #: 1853 – 20” ABS Hammerhead
…best from 5-7 GPM

Each $387.00

Part #: 1900 – Wheel Kit for 18″ & 20″

Each $98.00

Part #: 1855 – Swivel with Grease Fitting
also fits BE-Whirl-A-Way

Each $209.00

Part #: 1635G – Swivel Repair Kit

Each $137.64

Trigger-Gun-DG4000FSC-Hammerhead

Part #: 1627 – Replacement Gun

Each $63.97

GP  Stainless Hammerhead

General Pump Stainless Surface Cleaner
 
 
22″ Spinner

• Stainless Steel Deck with 3-nozzle bar*
• Compensating “Soft Touch” Trigger Gun
• Complete with Casters
• Durable swivel with grease fitting
• Rated to 4,500 PSI & 10 GPM

Requires 3 each 1/4” MEG Nozzles.
See nozzle information on this page.

Part #: 5500 – 22” Stainless Steel
…best from 5.0-12 GPM
 
Each $599.00

Part #: 5501 – Swivel with Grease Fitting
 

Each $209.00


Trigger-Gun-DG4000FSC-Hammerhead

 
 
Part #: 1627 – Replacement Gun
 
Each $63.97 

Mosmatic Floor, Wall & Roof

Mosmatic Wall w-handle

Mosmatic wall floater

Mosmatic Wall w-wheels

These professional graffiti and wall spinners are specially designed for vertical surfaces such as commercial restrooms, house siding, hard to clean concrete and garage trucks. It is also used for restoring all types of surfaces and refurbishing building exteriors and interiors.

The centerpieces of a Mosmatic Surface Cleaner is it’s swivel.  It is reinforced with self lubricating, stainless steel ball bearings with a carbide gasket system. They are specially designed for high revolutions ensuring long lasting durability.

Part #: 78.250 – 8” w/Skirt – hand held with gun
 
Each $394.48
 
Part #: 58.000 – Swivel for 78.250
 
Each $249.40
 
Part #: 80.774 – 21”, requires 2-each 1/8” nozzles
 
Each $997.00
 
Part #: 80.775 – 30”, requires 3-each 1/8” nozzles
 
 
Part #: 80.770 – 21”, no wheels req. 2-each 1/8” nozzle
 
Each $846.01
 
Part #: 80.771 – 21”, w/wheels req. 2-each 1/8” nozzle
 
 
Part #: 80.772 – 30”, w/wheels req. 3-each 1/8” nozzle
 
 
Part #: 55.253 – Replacement swivel for all above
 
Each $277.00
 
Part #: 78.260 – 8” w/Skirt, toggle swivel & lance
 
Each $429.53
 
Part #: 78.262 – 12” w/Skirt, toggle swivel & lance
 
Each $580.65
  
Part #: 78.272 – 12” w/wheels, toggle swivel & lance
 
Each $664.81
 
Part #: 58.908 – Swivel for 78.260, 78.262 & 272
 
Each $302.83
 
 

Steel Eagle

In-Line Trigger Spinner
with Deublin Swivel

Steel Eagle In-Line Deublin

 

2-Nozzle Arm

Part #: ASE-0003I – 24″ 2-Bar
…best from 5.5- 7-GPM

Each $1,697.00

Part #: ASE-0004I – 30″ 2-Bar

…best from 7 GPM & up

Each $1,876.00

3-Nozzle Arm

Part #: ASE-0003I-3 – 24″ 3-Bar
….best from 5.5- 7-GPM

Each $1,747.00

Part #: ASE-0004I-3 – 30″ 3-Bar

…best from 7 GPM & up

Each $1,847.00

4-Nozzle Arm

Part #: ASE-0003I-4 – 24″ 4-Bar
…best from 5.5- 7-GPM

Each $1,847.00

Part #: ASE-0004I-4 –  30″ 4-Bar

…best from 7 GPM & up
 
 

Steel Eagle – 30″

Adjustable Height

Steel Eagle Adjustable Height Surface Cleaner

Part #: ASE-0001I – 2-Noz Bar Assembly
…best from 8 GPM & up

Each Discontinued

Part #: ASE-0001I-3 – 3-Noz Bar Assembly

…best from 8 GPM & up

Each Discontinued

Part #: ASE-0001I-4 – 4-Noz  Bar Assembly

…best from 8 GPM & up
 
Each Discontinued
 

Steel Eagle Floor, Wall & Roof

 

Part #: ASE-0010 – 12”, 2-Nozzle Bar Floater

$624.20

 

Part #: ASE-0011 – 16”, 2-Nozzle Bar Floater

 
 

GP Floor, Wall & Roof

12″ Surface Cleaner

…for Wall, Roof & Graffiti

General Pump 12
 

• ABS Plastic Deck with 2-nozzle bar*
• Most durable swivel with grease fitting
• Rated to 4,500 PSI • Rated to 12 GPM

Requires 2 each 1/4” MEG Nozzles.
See nozzle information on this page.

Part #: 1850 – 12” ABS Hammerhead

Each $229.00

Part #: 1855 – Swivel with Grease Fitting

Each $209.00

Part #: 1635G – Swivel Repair Kit

Each $137.64

Comet Spinner

Rated to 3,000 PSI and 4.0 GPM

Surface cleaner-square

Part #: 5427

Each $143.10

 

TECH TALK

How to select the right surface cleaners

MATCHING THE SURFACE CLEANER

To obtain good cleaning results, the correct flat surface cleaner needs to be used with the correct pressure washer. Because the water flow is divided into the number of nozzles used, and the nozzle hole sizes combined create the pressure, pressure washer flow is a major factor. If a pressure washer produces five gallons per minute or less, a two-nozzle set up is correct. If a three or four nozzle concrete surface cleaner is used with a five GPM or less pressure washer it will be impossible to get the pressure high enough to clean properly.  For pressure washers with a flow rate of over five gallons per minute, a three-nozzle surface cleaner usually will work better. If using a pressure washer with a flow rate of seven gallons or more per minute, a four-nozzle surface cleaner can be used.

 

WHEELS OR FLOATING

Some flat general pump surface cleaners are made to be very lightweight and have no wheels on the deck. These units are called floaters. Others are heavier and are pushed on wheels. There are split opinions as to which one is better. Wheeled flat surface cleaners tend to be built with stronger materials, and sometimes with larger swivels. When washing large areas, it can be less tiresome pattern cleaning with a wheeled unit. Floaters are easier to load and unload from a vehicle. They tend to be used in a more side to side pattern than in a back and forth pattern. A big factor in choosing a floater is versatility to clean less accessible surfaces, like roofs.

 FAN SPRAY PATTERNS

Most agree that the best results are obtained when nozzles with a 25-degree fan are used in a concrete surface cleaner.  The next most popular fan used is a 15-degree. When using the 15-degree nozzle you will need to move slower in order to keep ‘zebra-stripes’ to a minimum.

 

WALL & TILE SPINNERS

There is a tremendous market out there that contractors never consider.  Every office building you pass, every restaurant you eat at, every post office you go to they are loaded with ceramic tile bathrooms, kitchens, etc. As a contractor and after about 3 years of cleaning restaurant exhaust hoods I finally realized that after every job I left $200.00 of easy money on the table simply because I never thought of cleaning the ladies & men’s room before I packed up. After that 90% of every restaurant we service included the restrooms. 

 

SIZING NOZZLES FOR SURFACE SPINNERS

Use a nozzle chart to determine the correct nozzle size for the pressure washer when using only one nozzle. Then divide that nozzle size by the number of nozzles on the concrete/flat surface cleaner. A nozzle chart shows that a number six nozzle is correct. The surface cleaner requires two nozzles. Six divided by two equals three. The surface cleaner should be used with two each #3 nozzles.

 

Mosmatic Wall Cleaner

Login to your account