Waste Water Recovery

Vacu-Boom Waste Water Truck
 

Included in a complete Vacu-Boom system?

  • Vacu-Boom (see information on sizes and configurations to follow).
  • 25 ft. long 2″ vac hose with Cam-Lever quick coupler.
  • Heavy duty portable wet vac.
  • Automatic pump-out system (inside the wet vac).
  • 25 ft. long 1 1/2″ discharge hose with Cam-Lever quick coupler.
  •  

Vacu-Booms can be assembled into a variety of configurations. The basic element of a boom is a 5 foot long section. The sections are joined together by devices called clips to form various lengths and shapes. Special fittings called end caps are used as end closures and vac hose connection points. Other fittings called center taps and square corners are available for certain configurations

What is Vacu-BoomTrademark?

  • An innovative and practical waste water capture system to prevent run-off from washing operations indoors and outdoors.
  • A highly effective spill containment system for many hazardous materials.

The Vacu-Boom system is engineered to be used in a wide variety of industrial and commercial applications where chemicals and fluid waste must be contained and/or captured and removed from the site.

 

The Vacu-Boom is a hollow, flexible tube five inches in diameter that is placed directly on a hard surface to form a downslope side dam or to completely encircle the wash or containment area. The boom has a C shaped cross section with the open side down. There are small liquid inlet openings on the water side of the boom at the bottom edge. During use, the boom is connected by a 25 ft. vacuum hose to the portable wet vacuum recovery unit.

Included in a complete Vacu-Boom system?

  • Vacu-Boom (see information on sizes and configurations to follow).
  • 25 ft. long 2″ vac hose with Cam-Lever quick coupler.
  • Heavy duty portable wet vac.
  • Automatic pump-out system (inside the wet vac).
  • 25 ft. long 1 1/2″ discharge hose with Cam-Lever quick coupler.
  •  

Vacu-Booms can be assembled into a variety of configurations. The basic element of a boom is a 5 foot long section. The sections are joined together by devices called clips to form various lengths and shapes. Special fittings called end caps are used as end closures and vac hose connection points. Other fittings called center taps and square corners are available for certain configurations

VACU-BOOM COMPLETE WASTE WATER CAPTURE SYSTEM

VB5-VR1A

Complete System

5 ft Vacu-Boom System with 101 CFM vacuum recovery unit with automatic pump out system 

Part #VB5-VR1A

$2,197.00

VB10-VR1A

Complete System

10 ft Vacu-Boom System with 101 CFM vacuum recovery unit with automatic pump out system 

Part #VB10-VR1A

$2,367.00

VB15-VR1A

Complete System

15 ft Vacu-Boom System with 101 CFM vacuum recovery unit with automatic pump out system 

Part #VB15-VR1A

$2,527.00

VB20-VR1B

Complete System

20 ft Vacu-Boom System with 202 CFM vacuum recovery unit with automatic pump out system 

Part #VB20-VR1B

$3,247.00

VB25-VR1B

Complete System

25 ft Vacu-Boom System with 202 CFM vacuum recovery unit with automatic pump out system 

Part #VB25-VR1B

$3,475.00

VB30-VR1B

Complete System

30 ft Vacu-Boom System with 202 CFM vacuum recovery unit with automatic pump out system 

Part #VB30-VR1B

$3,675.00

VB40-VR1B

Complete System

40 ft Vacu-Boom System with 202 CFM vacuum recovery unit with automatic pump out system 

Part #VB40-VR1B

$4,145.00

VB-CL12-VR1B

Complete System

12 ft Closed Loop Vacu-Boom System with 202 CFM vacuum recovery unit with automatic pump out system 

Part #VB-CL12-VR1B

$3,697.00

VB-CL15-VR1B

Complete System

15 ft Closed Loop Vacu-Boom System with 202 CFM vacuum recovery unit with automatic pump out system 

Part #VB-CL15-VR1B

$3,997.00

VB-CL18-VR1B

Complete System

18 ft Closed Loop Vacu-Boom System with 202 CFM vacuum recovery unit with automatic pump out system 

Part #VB-CL18-VR1B

$4,397.00

VACU-BOOM VACUUM ONLY

Vacuum 101 CFM

Part #VR1A
Vacuum 
101 CFM
With Pump Out
Vacuum Only

$1,897.00

Vacuum 202 CFM

Part #VR1B
Vacuum 
202 CFM
With Pump Out
Vacuum Only

$2,397.00

VACU-BOOM - BOOM ONLY

5 FT Vacu-Boom 

Part #VB5
 
5 FT
Vacu-Boom Only

 $497.00

10 FT Vacu-Boom 

Part #VB10

10 FT
Vacu-Boom Only

 $697.00

15 FT Vacu-Boom 

Part #VB15

15 FT
Vacu-Boom Only

 $947.00

20 FT Vacu-Boom 

Part #VB20

20 FT
Vacu-Boom Only

 $1,197.00

25 FT Vacu-Boom 

Part #VB25

25 FT
Vacu-Boom Only

 $1,725.00

30 FT Vacu-Boom 

Part #VB30

30 FT
Vacu-Boom Only

 $1,647.00

40 FT Vacu-Boom 

Part #VB40

40 FT
Vacu-Boom Only

 $2,097.00

12 FT Closed Loop

Part #VB-CL12

12 FT Closed Loop
Vacu-Boom Only

 $1,775.00

15 FT Closed Loop

Part #VB-CL15

15 FT Closed Loop
Vacu-Boom Only

 $2,175.00

18 FT Closed Loop

Part #VB-CL18

18 FT Closed Loop
Vacu-Boom Only

 $2,559.00

Oil Socks

Part #0898
Oil Dri Brand
Oil Socks
3″ x 48″

 

$10.69

Sludge Suckers

Part #1348
Sludge Sucker
Suck Out Mud, Sludge,
Waste Water, Containment


 $225.00

Tech Talk

Vacu-Boom

 WHAT IS a VACU-BOOM? 

Vacu-Boom is an innovative and practical waste water capture system to prevent run-off from washing operations indoors and outdoors.

A highly effective spill containment system for many hazardous materials.

The Vacu-Boom system is engineered to be used in a wide variety of industrial and commercial applications where chemicals and fluid waste must be contained and/or captured and removed from the site.

The Vacu-Boom is a hollow, flexible tube five inches in diameter that is placed directly on a hard surface to form a down-slope side dam or to completely encircle the wash or containment area. The boom has a C shaped cross section with the open side down. There are small liquid inlet openings on the water side of the boom at the bottom edge. During use, the boom is connected by a 25 ft. vacuum hose to the portable wet vacuum recovery unit.

HOW DOES VACU-BOOM WORK?  

When the wet vac system is turned on, the Vacu-Boom tightly seals itself to the surface like a giant suction cup, to form an impervious liquid barrier. Simultaneously, the waste water or other liquid is extracted into the boom and travels with the airflow through the boom and vacuum hose into the sump of the vacuum unit. The vacuum unit is equipped with an automatic pump out system which discharges water through a discharge hose into a holding tank, filter unit or sanitary sewer.

When containing highly toxic materials or flammable liquids that should not be drawn into the vacuum unit, the vacuum is used only to create a tight seal between the boom and the surface. The liquid is not extracted through the boom and vacuum.

WHERE CAN VACU-BOOM BE USED?

Outdoor vehicle or equipment washing

In-plant equipment washing

Emergency storm water containment

Boats and ships – to prevent deck run-off

Marinas – to prevent contamination from run-off

Parking lot or sidewalk washing – to capture dirty water run-off

Emergency hazardous liquid spill containment

Airports – to capture run-off from aircraft washing

WHAT ARE SOME OF THE FEATURES OF VACU-BOOM?

Can be used on any hard surface such as concrete, asphalt, wood and steel.

Fast set up and take down – less than 5 minutes for one person.

Simultaneously captures and extracts liquids for waste water and many liquid spills.

Captures and contains concentrated flammables or hazardous liquids without extraction.

Materials used in Vacu-Boom do not absorb liquids and contaminants. Can be rinsed off easily after use.

Easy to store and transport. Vacu-Boom breaks down into 5 ft. long sections.

High degree of tolerance for acids, caustics and petro chemicals.

CAN VACU-BOOM BE USED IN MY ENVIRONMENT?

Reading the FAQs about Vacu-Boom will help you understand how you can use Vacu-Boom productively in your environment.  This information can be found at http://www.vacuboom.com

The Vaccu-Boom Assembly:

 Vacu-Booms can be assembled into a variety of configurations. The basic element of a boom is a 5 foot long sections. The sections are joined together by devices called clips to form various lengths and shapes. Special fittings called end caps are used as end closures and vac hose connection points. Other fittings called center taps and square corners are available for certain configurations.

Login to your account